Differences

This shows you the differences between two versions of the page.

--- small_laser_cutter [2017/01/15 05:49] – srw7
+++ small_laser_cutter [2018/07/04 03:19] (current) – [Material Settings] swalde
@@ Line 21: / Line 21: @@
 | MDF/HB   | 10% - 20% | 500mm/s  |
 | LaserMAX | 17% | 500mm/s |
+| CerMark LMM-6000 on Aluminum | 100% | 125-250mm/s |
+Haven't dialed in the CerMark yet, but this will give you a starting point.

small_laser_cutter.1484459347.txt.gz · Last modified: 2017/01/15 05:49 by srw7

Back to top