Differences

This shows you the differences between two versions of the page.

--- cnc_machine_goliath [2018/09/06 17:56] – thesaxmachine
+++ cnc_machine_goliath [2022/07/17 03:21] – swalde
@@ Line 1: / Line 1: @@
+=== Note: Goliath is no longer at the space.  The Laguna is a more capable replacement ===
 === CNC Training ===
@@ Line 14: / Line 16: @@
     * turn off the switch for that
     * turn off the switch for cnc power
-    * notify Albert
+    * notify thespace@sktechworks.ca
   * Be aware of all the different ways you can shut off the machine
     * Safety should be your number one concern
@@ Line 158: / Line 160: @@
 ==Fusion 360 Toolpaths==
+I nice formatted tutorial of how to setup a job in Fusion 360
+[[http://evanandkatelyn.com/2018/01/fusion-360-cam-tutorial-for-cnc-beginners/]]
+{{:Techworks.zip| Fusion 360 Post Processor}}
 Update: the following G28 thing might actually not be necessary.  Before setting the origin on the workpiece, move the spindle to a safe location above the workpiece.  Then, click "Ref All Home."  If you do this, that location will be the "Home" position that G28 goes to.

cnc_machine_goliath.txt · Last modified: 2022/07/17 03:23 by swalde

Back to top