The new and improved Saskatoon Techworks wiki, powered by DokuWiki.

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
laser_cutter [2018/11/23 18:09]
swalde [Material Settings]
laser_cutter [2019/01/24 19:02] (current)
swalde [Material Settings]
Line 18: Line 18:
 | PET-G | .020" ​      | 100%   | 75mm/​s ​  | | | PET-G | .020" ​      | 100%   | 75mm/​s ​  | |
 | Acrylic | 1/8" - 3mm | 100% | 20mm/​s ​ | | | Acrylic | 1/8" - 3mm | 100% | 20mm/​s ​ | |
-| ABS | 1/8" - 3mm | 75% | 20mm/s  | |+| ABS | 1/8" - 3mm | 100% | 18mm/s  | This previously said 20mm/s @75% but that wasn't cutting through ​|
 | Felt | 1/16" | 10% | 20mm/​s ​ | Use backing board | | Felt | 1/16" | 10% | 20mm/​s ​ | Use backing board |
 | Styrene | 0.30" | 100% | 20mm/​s ​ |  | | Styrene | 0.30" | 100% | 20mm/​s ​ |  |
Print/export
QR Code
QR Code laser_cutter (generated for current page)