Trace:
You are here: start » cnc_machine_goliath

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
cnc_machine_goliath [2018/09/06 17:57] – thesaxmachinecnc_machine_goliath [2018/09/06 18:03] – thesaxmachine
Line 158: Line 158:
  
 ==Fusion 360 Toolpaths== ==Fusion 360 Toolpaths==
 +[[File:Techworks.zip|Post Processor]]
 +
 Update: the following G28 thing might actually not be necessary.  Before setting the origin on the workpiece, move the spindle to a safe location above the workpiece.  Then, click "Ref All Home."  If you do this, that location will be the "Home" position that G28 goes to. Update: the following G28 thing might actually not be necessary.  Before setting the origin on the workpiece, move the spindle to a safe location above the workpiece.  Then, click "Ref All Home."  If you do this, that location will be the "Home" position that G28 goes to.
  
cnc_machine_goliath.txt · Last modified: 2022/07/17 03:23 by swalde
Back to top
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0